So in the previous parts which you can find here and here between my son and I – we’d managed to get power back to […]
Read moreTag: Extractor Fan
Tags
book case (2)
Bookcase (2)
Carpentry (8)
Coat Rack (3)
concept design (5)
Counter Tops (1)
Cupboard Fitting (1)
custom shelving (2)
Damp (3)
DCD803NT-XJ (1)
Design (2)
Dewalt (3)
DeWalt DCS365N (1)
DeWalt Multi Head driver (1)
DIY (2)
Drill Driver (1)
Electrical (3)
External Insulation (1)
Extractor Fan (1)
Extractor Fan Installation (1)
Galley Kitchen (1)
House Hunting (1)
Kitchen (3)
Kitchen fitting (4)
Kitchens (4)
Log Store (2)
Oak Trim (1)
Planing (2)
Projects (2)
Sanding (3)
Sealing (1)
second fix (2)
Shelving (2)
Shoe Rack (3)
Splashbacks (1)
Spruce (2)
staining (4)
Surveys (1)
Triangle (1)
Trim Routing (2)
Wago (1)
Wall Panelling (1)
woodword (1)
Woodwork (3)
Woodworking (2)
Recent Posts
Review: Dewalt DCS520NT 54V XR FLEXVOLT Brushless Plunge / Track SawIn Powertools, Saws, ToolsAugust 9, 2026So, a while back I did a project to build three large […]
A story about a new sofa, refurbishing an Alcove and the bastard Oak Capping – Part 1 …In Carpentry, The BlogAugust 8, 2026Bear with the intro to this post as it jumps around a […]
Dewalt: DCD803NT-XJ 18V XR Brushless Multi-Head Drill Driver – ReviewIn Drill Drivers, Drills, ToolsJuly 27, 2026I think that I have an addiction. A tool addiction […]
The Story of the Oak Dining Table – Part 1 …In Projects, The Oak Dining TableMarch 27, 2026I have always wanted a decent dining table. Up until […]
Project: Living Area Book Case – Part 2In The BookcaseOctober 26, 2025In the first part of this project series I wrote about […]
Project: Living Area Book Case – Part 1In The BookcaseOctober 25, 2025Project Specifics: Project Dimensions: Project Costs […]
Project: Coat Rack ShelvingIn Coat and Shoe Rack, Projects, ShelvingOctober 17, 2025Project Specifics: Project Dimensions: Project Costs […]
Project: Kitchen Re-fit – How it finishedIn Kitchens, ProjectsOctober 12, 2025Well this is the final part of my Kitchen Refit […]
Project: Kitchen Refit – Part 4In Kitchens, ProjectsOctober 12, 2025In the previous parts of this kitchen fitting […]
Project: Kitchen ShelvingIn Kitchen Shelving, Kitchens, ProjectsOctober 9, 2025Normally I would start a project entry off by […]
Project: Kitchen Refit – Part 3In Kitchens, ProjectsOctober 8, 2025So in the previous parts which you can find here and […]
Project: Kitchen Refit – Part 2In Kitchens, ProjectsOctober 7, 2025In part 1 I set the scene for what, to date has been […]
Project: Shoe and Coat Rack – Part 2In Coat and Shoe Rack, ProjectsOctober 5, 2025In part 1 of this project I took you through the […]
Project: Porch Shoe and Coat Rack – Part 1In Coat and Shoe Rack, ProjectsSeptember 29, 2025Project Specifics: Dimensions: Project Costs and […]
Project: Kitchen Refit – Part 1In Kitchens, ProjectsSeptember 27, 2025Project Specifics: Projects costs and Difficulty […]
The story of a little cottage located in the Shire – Part 3In General Rambles, The BlogSeptember 21, 2025I left the last part on a little bit of a cliffhanger. […]
Project: Indoor Log Store – Part 2In Projects, The Indoor Log StoreSeptember 15, 2025In part 1 of the write up of this project I took you […]
Project: Indoor Log Store – Part 1In Projects, The Indoor Log StoreSeptember 11, 2025Project Specifics: Project Dimensions: Project Costs […]- How I like to present my projectsIn Projects, The BlogSeptember 9, 2025It can be hard to give someone an idea of the true […]
My top tips for any DIY taskIn General Rambles, The BlogSeptember 6, 2025I was asked by a friend the other day who is […]
The story of a little cottage located in the Shire – Part 2In General Rambles, The BlogSeptember 4, 2025Continuing from what might be legitimately be seen as […]
DeWalt: DCF601D2-GB Sub Impact Drill DriverIn Drill Drivers, Powertools, ToolsSeptember 4, 2025I picked this little driver up about two years ago and […]
The story of a little cottage located in the Shire – Part 1In General Rambles, The BlogSeptember 3, 2025Well folks, prepare for a long first “setting […]
